Still RX60-25, Original Instructions Manual, Page: 353 / 470

Operation
4
Replacing and transporting the battery
6327_600-001_V4
1
– Disconnect the battery male connector (1).
CAUTION
There is a risk of short circuit if the
cables are damaged!
Position the battery cable on the
battery in such a way that it cannot be
crushed when removing or inserting
the battery or when closing the battery
cover.
– Check the connecting cables for
damage.
– Ensure that the battery cable does
not come into contact with the
battery cover.
WARNING
Risk of crushing and shearing!
Personnel must not stand directly
next to the battery or between the
battery and the forklift truck when
removing and inserting the battery
with the forklift truck or lift truck.
WARNING
Risk of accident!
The load capacity of the truck in use must at least
match the battery weight (see battery identification
plate).
6210_606-011
A
B
– Before picking up the battery, the fork arms
must be adjusted to match the opening
in the chassis (A). Push the fork arms
together. Maintain the maximum possible
distance between the fork arms.
Taking up the battery
CAUTION
Risk of component damage!
– The fork arms must not be moved underneath
the battery beyond the length of the opening in
the chassis.
NOTE
It is helpful if this measurement (B), measured
from the fork tips, is marked on the fork arms.
56338011803 EN - 02/2019 - 09 339
www. duma -rent.com