Still RX60-25, Original Instructions Manual

Page: 345 / 470

Operation
4
Handling the lithium-ion battery
DANGER
There is a risk of damage, short circuiting and
explosion!
– Do not place any metal objects or tools on the
battery.
– Keep away from naked flames.
– Do not smoke.
– Connect the battery male connector to the
plug on the battery charger.
– Start the battery charger.
The charging process starts automatically.
The display signals the charging process by
illuminating the LEDS as a chase light.
The charger indicates when the battery is fully
charged. Only disconnect the battery from the
charger if there is no current is flowing.
The battery has no memory effect. Therefore,
it can be charged in any charge state without
the capacity of the battery being impaired.
At ambient temperatures below 0°C, the
charging process will take much longer.
– Observe the information in the operating
instructions for the battery and the battery
charger.
After charging
The battery charger will stop automatically.
– Disconnect the battery male connector from
the plug for the battery charger.
– Insert the battery male connector fully into
the plug connection on the truck.
CAUTION
There is a risk of short circuit if the
cables are damaged.
Do not crush the charging cable when
closing the battery cover.
– Make sure that the charging cable
does not come into contact with the
battery cover.
56338011803 EN - 02/2019 - 09 331
www. duma -rent.com