Still RX60-25 Page 337 Original Instructions Manual Download

Page: 337 / 470

Operation

Handling the lithium-ion battery

Lithium-ion batteries "GGS Li-ion 80 V"

24.1 kWh and 60 kWh

6301_003-023

Battery male connector

Lifting eyes

Display

Technology compartment

Safety valve

Diagnostic connector

WARNING

Risk of accident due to weakened lifting eyes.
If bent lifting eyes are straightened, they lose their

rigidity. The lifting eyes are then no longer able to

support the weight of the battery. The battery may

fall.
– Do not straighten bent lifting eyes.
– Have bent lifting eyes replaced by the authorised

service centre.

NOTE

When switching to lithium-ion batteries,

have the truck electronics adapted by the

authorised service centre.

56338011803 EN - 02/2019 - 09

323

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands

Still RX60-25, Original Instructions Manual

Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands