Still RX60-25, Original Instructions Manual, Page: 277 / 470

Operation
4
Trailer operation
6321_003-116
2
3
– Push the coupling pin (2) down, turn 90°
and pull out.
– Slowly move the truck forwards and guide
the tow-bar eye completely out of the
counterweight.
– Insert the coupling pin into the counter-
weight, press downwards against the spring
pressure and turn 90° (the coupling pin is
locked in this position).
Automatic tow coupling
DANGER
People may be trapped between the truck and
trailer.
When hooking up, ensure that no one is between
the truck and trailer.
DANGER
Never jack up the truck on the tow coupling or use
it for crane lifting. The tow coupling is not designed
for this and could be deformed or damaged. This
could cause the truck to fall, with potentially fatal
consequences!
– Use the tow coupling only for towing.
– For jacking up and crane loading, use only the
designated lifting points.
DANGER
The tow coupling is not designed to support loads
and could become deformed or destroyed. This
could cause the supported load to fall, with poten-
tially fatal consequences!
– The tow coupling should be subjected only to
horizontal loads, i.e. the tiller must be horizontal.
56338011803 EN - 02/2019 - 09 263
www. duma -rent.com