Still RX60-25 Original Instructions Manual Download Page 267

Page: 267 / 470

Operation

Cab

Closing the cab door

DANGER

There is a risk of damage caused by collision if the

cab door opens while driving.
– The cab door must be latched securely in the

engaged position.

6321_003-141_V2

Opening the side windows

WARNING

There is a risk of crushing between the window

frame and side window from the side windows

slipping inadvertently during travel.
– Make sure that the handle engages securely in

the corresponding stop slot.

Opening the rear side window:

– Press the handle (3) together and slide the

rear side window (2) forwards.

Opening the front side window:

The front side window (1) can be opened in the

same way as the rear side window.

6321_003-141_V2

Closing the side windows

WARNING

There is a risk of crushing between the window

frame and side window from the side windows

slipping inadvertently during travel.
– Make sure that the handle engages securely in

the corresponding stop slot.

Closing the rear side window:

– Press the handle (3) together and pull the

rear side window (2) to the rear.

Closing the front side window:

The front side window (1) can be closed in the

same way as the rear side window.

56338011803 EN - 02/2019 - 09

253

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Still RX60-25, Original Instructions Manual, Page: 267 / 470

Search results

Summary of Contents for RX60-25

Reviews: