Still RX60-25, Original Instructions Manual, Page: 260 / 470

4
Operation
Auxiliary equipment
Ceiling sensor (variant)
Description
1
The ceiling sensor (1) on the overhead guard
is an assistance system that automatically
reduces the driving speed of the truck within
halls. However, this assistance system does
not release the driver from the responsibility
of observing the speed limits on company
premises.
Depending on the system setting, the ceiling
sensor can detect overhead structures above
the truck at a height of 2 m to 24 m above the
sensor.
Operating the ceiling sensor system
The drivers are to be instructed on the use
of the ceiling sensor system by the operating
company.
When the driver enters a hall for the first
time after starting work, he must be certain
that the ceiling sensor system is functioning
correctly. Despite the ceiling sensor system
being installed, the driver must also check the
speed indicator on the display-operating unit
on a regular basis to ensure that he does not
exceed the maximum speed permitted for the
environment.
• Entering a hall
The ceiling detector system automatically
detects whether the truck enters a hall. The
system then automatically slows the truck to
the maximum speed that is set for the hall.
• Leaving a hall
If the truck leaves the hall again, the ceiling
detector system enables the maximum
speed set for areas outside the hall. Due
to the range of the sensor, this may not
happen until the truck is a few metres away
from the hall exit. Before the truck is able to
accelerate to the maximum speed permitted
for outdoor areas, the speed limitation must
still be unlocked. To do this, release the
246 56338011803 EN - 02/2019 - 09
www. duma -rent.com