Still RX60-25 Original Instructions Manual Download Page 233

Page: 233 / 470

Operation

Attachments

5060_003-122

– Note the following attachment functions and

pictograms.

Adjust fork arms: open

Adjust fork arms: close

Rotate to the left

Rotate to the right

NOTE

The pictograms shown correspond to the

attachments ﬁtted to this truck at the factory. If

an attachment with other functions is ﬁtted, the

pictograms must be checked for the correct

representation and changed if necessary.

– Contact the authorised service centre if

required.

56338011803 EN - 02/2019 - 09

219

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Still RX60-25, Original Instructions Manual, Page: 233 / 470

Search results

Summary of Contents for RX60-25

Reviews: