Still RX60-25, Original Instructions Manual

Page: 223 / 470

Operation
4
Attachments
2060_003-019
1
Controlling attachments using
multi-lever operation
In this equipment, the attachments (variant)
are controlled via the operating lever (1).
The pictograms on the operating lever show
the functions that are activated by this lever.
The meanings are as follows:
– Move operating lever (1) forwards.
The attachment moves in the direction shown
in the upper part of the pictogram.
– Move operating lever (1) backwards.
The attachment moves in the direction shown
in the lower part of the pictogram.
7311_862-001
2 3
6
4
7
9
10
5
8
– Note the following attachment functions and
pictograms.
2
Move side shift frame or fork for-
wards/backwards
3
Move sideshift to the left/right
4
Adjust fork arms: open/close
5
Swivel lift mast or fork to the left/right
6
Release/clamp load retainer
7
Push off/pull in load
8
Open/close clamps
9
Turn to the left/right
10
Tip shovel over/tip shovel back
NOTE
The pictograms shown correspond to the
attachments fitted to this truck at the factory. If
an attachment with other functions is fitted, the
pictograms must be checked for the correct
representation and changed if necessary.
– Contact the authorised service centre if
required.
56338011803 EN - 02/2019 - 09 209
www. duma -rent.com