Still RX60-25 Page 193 Original Instructions Manual Download

Page: 193 / 470

Operation

Lifting

CAUTION

Risk of damage to property due to the lift mast

colliding with racks or other objects!
– Before using the "lift mast vertical position"

comfort feature, position the truck at a sufﬁcient

distance from racks and other objects.

The "lift mast vertical position" comfort feature

consists of the following individual functions:
• Display of the "lift mast vertical position"
• Automatic approach towards the "lift mast

vertical position"

• Gentle running-in to the end stops

6210_00

-092

The "lift mast vertical position" comfort feature

is only available as a variant if the truck is

equipped with one of the following operating

devices:
• Double mini-lever (1)
• Triple mini-lever (2)
• Quadruple mini-lever (3)
• Fingertip (4)
• Joystick 4Plus (5)

56338011803 EN - 02/2019 - 09

179

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands

Still RX60-25, Original Instructions Manual

Search results

Summary of Contents for RX60-25

Reviews:

Related manuals for RX60-25

Brands by name

Popular brands