Still RX60-25, Original Instructions Manual, Page: 174 / 470

4
Operation
Lifting
Lifting
Lifting system variants
The movement of the fork carriage and the
lift mast heavily depends on the following
equipment:
• The lift mast with which the truck is
equipped, see ⇒ Chapter "Types of lift
mast", P. 4-160
• The operating device with which the
hydraulic functions are controlled, see
⇒ Chapter "Lifting system operating de-
vices", P. 4-161
Regardless of the equipment variants of the
truck, the basic specifications and procedures
must be complied with, see ⇒ Chapter "Safety
regulations when handing loads", P. 4-183.
Types of lift mast
One of the following lift masts may be installed
in the truck:
6210_810-001
1
Telescopic mast
During lifting, the lift mast rises over the outer
lift cylinders, bringing the fork carriage with it
via the chains (fork carriage rises twice as fast
as the inner lift mast). The top edge (1) of the
inner lift mast can therefore be higher than the
fork carriage.
DANGER
Risk of accident due to collision of the lift mast or
load with low ceilings or entrances.
– Note that the inner lift mast or load may be higher
than the fork carriage.
– Note the heights of ceilings and entrances.
160 56338011803 EN - 02/2019 - 09
www. duma -rent.com