Still RX60-25 Original Instructions Manual Download Page 138

Page: 138 / 470

Operation

Blue-Q efﬁciency mode

12_00

-179_en

– Switch to the

CONFIGURATION

menu;

see the chapter entitled "Adjusting the

displays".

– Keep pressing the drive programme button

(1) or the menu change button (2) until op-

tion

BLUE Q CONFIGURATION

appears.

– Conﬁrm your selection with Softkey

(4).

The

BLUE-Q CONFIGURATION

appears.
– Press drive program button (1) or menu

change button (2) until the desired efﬁ-

ciency mode appears in the display.

– Conﬁrm the set efﬁciency mode using

Softkey

(4).

– Use the Softkey

(3) to exit the menu and

return to the next level up.

124

56338011803 EN - 02/2019 - 09

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Still RX60-25, Original Instructions Manual, Page: 138 / 470

Search results

Summary of Contents for RX60-25

Reviews: