Still RX60-25 Original Instructions Manual Download Page 125

Page: 125 / 470

Operation

Display-operating unit

7312_003-106_V2

Additional indicators

Menu change button
When the menu change button is

pressed, the following additional indi-

cators appear:

"Service in" display
Displays the remaining time in operating

hours until the next maintenance opera-

tion is due according to the maintenance

schedule in the maintenance instruc-

tions. Contact the authorised service

centre in good time.

Operating hours
Displays the total operating hours

completed by the truck. The hour meter

starts running as soon as the truck is

driven or the working hydraulics are

actuated.

Total distance
Displays the total distance driven in

kilometres.

Daily kilometres
Displays the kilometres driven for the

day.

NOTE

Ask the authorised service centre about the

speed driven indicator.

NOTE

Have all repair and maintenance work perfor-

med by an authorised service centre. This is

the only way to permanently correct defects.

– Inform the authorised service centre when

the maintenance interval is reached.

Adjusting the displays

NOTE

The parking brake must always be engaged

when you adjust the displays. The displays

cannot be adjusted if the parking brake is not

engaged.

56338011803 EN - 02/2019 - 09

111

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Still RX60-25, Original Instructions Manual, Page: 125 / 470

Search results

Summary of Contents for RX60-25

Reviews: