Still RX60-25 Original Instructions Manual Download Page 119

Page: 119 / 470

Operation

Switching on

BQ_026_en

CONFIRM

appears in the display.

The

CONFIRM

submenu is used to conﬁrm

the new driver PIN.
– Enter the new driver PIN for a second time

in the

CONFIRM

ﬁeld (8) using the buttons

or Softkeys (7).

If the entry matches the new driver PIN

previously entered, the system will accept

the new driver PIN once the last digit has

been entered. The display switches back to

the

ACCESS CODE

menu.

Another driver PIN can be deﬁned here.

BQ_023_en_V2

If the driver PIN entered in the

CONFIRM

sub-

menu does not match the driver PIN entered

previously in the

NEW CODE

submenu, the

message

INVALID

will appear.

The message will then disappear after a short

time. The new driver PIN can be entered in

the

CONFIRM

submenu for further conﬁrma-

tion.

56338011803 EN - 02/2019 - 09

105

www.

duma

-rent.com

Summary of Contents for RX60-25























































































































































































































































































































































































































































































Search results

Summary of Contents for RX60-25

Reviews:

Still RX60-25, Original Instructions Manual, Page: 119 / 470

Search results

Summary of Contents for RX60-25

Reviews: