Still RX60 25-35, Original Instructions Manual

Page: 28 / 518

Nameplate of the pressure-tight
housing
The flame proof enclosures are marked with a
nameplate. The data on the plate corresponds
to the approved area of application for the
flame proof enclosure. The plate must be posi-
tioned so that it is always easy to read. Only
the manufacturer is allowed to re-label the
flame proof enclosures.
Various notes are printed on the plate:
●
"Cable entries: see instructions"
●
"Use screws quality 8.8 or better"
●
"Do not open when energised"
●
"Do not open when an explosive atmos-
phere may be present"
A warning sign is located in the immediate vi-
cinity of the nameplate:
●
"Open only in a non-potentially explosive at-
mosphere"
Production number
NOTE
The production number is used to identify the
truck. It can be found on the nameplate and
must be referred to in all technical questions.
The production number contains the following
coded information:
(1) Production location
(2) Model
(3) Year of manufacture
(4) Sequential number
5060_901-020_V2
0044
S.r.l.
(I) 20812 LIMBIATE (MB) ‒ Via Marconi, 31
CBH ‒ 5 II 573714 3
CEC 14 ATEX 043X T.amb. = ‒20°C to + 60°C
Ex d
ia 6
IIC T Gb
[ [
s/n Year 20
/ T cable °C
Ex tb
CABLE ENTRIES : SEE INSTRUCTIONS
USE SCREWS QUALITY 8.8 OR BETTER
DO NOT OPEN WHEN ENERGIZED
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE MAY BE PRESENT
IIIC T
II 2 (1) GD
°C Db IP66
[ [
3
4
5
6
1 2
Serial number
CE labelling
Year of manufacture
Approved area of use
Inspection number
Manufacturer
1
2
3
4
5
6

7090_921-004
xx xxxx x xxxxx
1
2
3
4

Foreword
1
Your truck
14 56378011526 EN - 03/2021 - 01