Maintenance
6
1000-hour maintenance / Annual maintenance
1000-hour maintenance / Annual maintenance
Other tasks
– Perform all maintenance work; see the
"Maintenance" chapter.
6210_110-001
1
2
2
Checking the cable terminals
– Check feed cable from pump motor (1) and
traction motor (2) for secure seating, status,
and insulation.
NOTE
Oxidised terminals and brittle cables lead to
voltage drops and thus to malfunctions.
– Remove oxidation residues and replace
brittle cables.
6311_003-010_V2
1
Checking the hydraulic oil level of the
hydraulic battery carrier
WARNING
Hydraulic oils are hazardous to your health and are
under pressure during operation.
– Note safety regulations for working with hydrau-
lic oils; see ⇒ Chapter "Hydraulic fluid", P. 3-40.
Checking the hydraulic oil level
– Park the truck securely; see ⇒ Chap-
ter "Parking the truck securely and switch-
– Remove the bottom plate.
– Unscrew sealing plugs (1) .
The oil level must lie between 65 and 70 mm
when measured from the base of the con-
tainer.
– If the oil level is below the required level,
top up the hydraulic oil via the filler neck
170525 EN - 10/2016
371
Summary of Contents for RX60-16
