Still RX60-16, Original Instructions Manual

Page: 191 / 412

Operation
5
Working with attachments
5060_003-040_V2
2
1
1
3
5060_003-041
Controlling attachments using
multi-lever operation and the
5th function
The attachments (variant) are controlled in
this version using operating levers (1) and (2).
On the operating lever (1) you can, with the
aid of switch (3), initiate a function changeover
so that this operating lever then controls the
"5th function".
NOTE
The designation "5th function" refers to the
fact that the four operating levers control
four functions, while the "5th function" can
be controlled by switching functions.
The central and bottom parts of the pictograms
on the operating levers always show the
function that is activated by that lever. The
top part of the pictogram shows that the
attachment is equipped with the "5th function".
The meanings are as follows:
– Move the operating lever forwards
The attachment moves in the direction shown
in the centre part of the pictogram.
– Move the operating lever backwards
The attachment moves in the direction shown
in the lower part of the pictogram.
– Actuate the switch
The additional function of the attachment is
activated and can be controlled as the "5th
function" with the operating lever.
NOTE
Please see the operating instructions of the
attachment that is fitted for the movements/ac-
tions resulting from use of this "5th function".
170525 EN - 10/2016 179