Still RX60-16, Original Instructions Manual

Page: 119 / 412

Operation
5
Driving
Maximum gradient [%]
Model
Type
With load Without load
With battery
carrier
RX60-16
(6311)
21.0 25.4 20.0
RX60-18
(6313)
17.8 26.4 19.0
RX60-20
(6315)
16.7 27.2 18.0
NOTE
Trucks fitted with a hydraulic battery carrier
have a smaller ground clearance, meaning
the permitted climbing capability is reduced.
The upwards and downwards gradients must
not exceed the maximum gradients above and
must feature a rough surface.
The top and bottom of the gradient must
feature smooth and gradual transitions to
prevent the load from falling to the ground or
the truck being damaged.
Warning: Components may project
beyond the truck contour
Trucks are often required to drive through very
narrow or very low spaces such as aisles or
containers. The dimensions of the trucks are
designed for this purpose. However, movable
parts may project beyond the truck contour
and be damaged or torn off. Examples of such
components include:
• A folding roof panel in the driver’s cab
• Cab doors
• LPG cylinders that can be swung out
Condition of the roadways
Roadways must be sufficiently firm, level and
free from dirt and fallen objects.
Drainage channels, level crossings and
similar obstacles must be evened out, and
if necessary, ramps must be provided so that
trucks can drive over these obstacles with as
few bumps as possible.
Note the load capacity of manhole covers,
drain covers etc.
170525 EN - 10/2016 107