Still RX50-10, Original Instructions Manual

Page: 360 / 374

7
Technical data
Battery specifications
Battery specifications
NOTE
Battery specifications to DIN 43535 A
CAUTION
The battery weight and dimensions affect the
stability of the truck.
When replacing the battery, the weight ratios
must not be changed. The battery weight must
remain within the weight range specified on the
nameplate. The location of ballast weights must not
be changed. The bottom of the battery tray must be
closed.
– Use batteries that meet DIN standards.
– Do not change the position of ballast weights.
– Check the battery weight against the information
on the nameplate.
– Only use a battery tray that is closed at the
bottom.
RX50-10 (5060)
Battery compartment dimensions in mm Battery
designa-
tion
Capac-
ity
in Ah
Weight
in kg
± 5%
Length
Width
Height
Tray Ballast
weight
in kg
4 PzV 440 440
4 PzS 460 460
372 284 845 645 104
-
.
RX50-10 (5061)
Battery compartment dimensions in mm Battery
designa-
tion
Capac-
ity
in Ah
Weight
in kg
± 5%
Length
Width
Height
Tray Ballast
weight
in kg
4 PzV 440 440
4 PzS 460 460
372 284 845 645 104 78
5 PzV 500 500
5 PzV 550 550
5 PzS 575 575
5 PzS 625 625
5 CSM
625
625
445 338 845 645 105
-
.
348 55048011501 EN - 12/2015