Still RX50-10, Original Instructions Manual

Page: 345 / 374

Maintenance
6
1000-hour maintenance / Annual maintenance
1000-hour maintenance / Annual maintenance
Other tasks
– Perform all maintenance work; see the
"Maintenance" chapter.
Checking the cable connections
– Check that the feed cables of the pump
motor and traction motor are securely
attached, in good condition and insulated.
NOTE
Oxidised connections and brittle cables result
in voltage drops and cause malfunctions.
– Remove oxidation residues and replace
brittle cables.
Checking accelerator pedal and
brake pedal
– Check the accelerator pedal and brake
pedal for damage and function.
– Remove the bottom plate as necessary and
lubricate the mechanism.
7311_003-012
Checking the brake system for
correct operation and leaks
– Perform a functional check of the brake
system; see ⇒ Chapter "Checking the brake
system for correct function", P. 5-99.
If you determine that the pedal stop is soft,
the pipe lines and hoses must be checked
for condition and leaks and the brake system
must be bled.
– Contact your service centre.
DANGER
Risk of accident!
Do not put trucks with a defective brake system into
service.
55048011501 EN - 12/2015 333