Still RX50-10, Original Instructions Manual

Page: 291 / 374

Operation
5
Handling the battery
%
75
5060_003-062_V2
1
Checking the battery charge status
CAUTION
Deep discharges shorten the service life of the
battery.
If a battery charge of 0% is shown on the display,
this corresponds to a deep discharge of below 20%
of the nominal capacity.
– Avoid deep discharges (0% shown on the
display).
– Charge the batteries at once.
– Do not leave batteries in a discharged or partly
discharged state.
– Apply the parking brake.
– Switch on the key switch.
– Read the charge state (1) from the display.
– Charge a discharged or partly discharged
battery.
Charging the battery
CAUTION
Risk of component damage!
Incorrect connection or operation
of the charging station or battery
charger may result in damage to
components!
– Follow the operating instructions
for the charging station or battery
charger and for the battery.
CAUTION
Possible damage to the male battery connector!
If the battery male connector is disconnected or
connected while the ignition switch is switched
on or the battery charger is under load, an arc
will be generated at the battery male connector.
This can lead to corrosion at the contacts, and can
considerably shorten the service life of the contacts.
– Switch off the key switch or battery charger be-
fore the battery male connector is disconnected
or connected.
– Do not disconnect the battery male connector
while under load, except in an emergency.
– Park the truck securely.
– Switch off the key switch.
55048011501 EN - 12/2015 279