Still RX50-10, Original Instructions Manual

Page: 274 / 374

5
Operation
Handling the battery
1
5060_003-051
– Disconnect the battery male connector (1)
by pulling in the direction of the arrow at the
plug connection.
– Place the battery male connector on the
battery.
CAUTION
There is a risk of short circuit if the
cables are damaged.
Position the battery cable on the
battery in such a way that it cannot
be crushed - either when removing or
inserting the battery, or when closing
the battery door.
– Check the connecting cable for
damage.
– Ensure that the battery cable does
not come into contact with the
battery door.
– Close the battery door.
Battery replacement using a bridge
Removing the battery
DANGER
WARNING
If the truck is not parked on horizontal
ground, there is nothing to prevent
the battery rolling away once the lock
has been opened, leading to a risk of
crushing and shearing!
– The truck must be parked on
horizontal ground.
– People must not stand directly in
the battery’s direction of travel or in
the battery compartment.
– Do not place objects or any parts
of the body between the battery
and the truck chassis.
– Use only the handles that are
provided and identified.
262 55048011501 EN - 12/2015