Still RX50-10, Original Instructions Manual

Page: 236 / 374

5
Operation
Operating the display and operating unit
1 2 3
ABE_Softkeytasten_V2
A grey bar (3) highlights the active soft key
column, i.e. the soft keys in this column can be
operated. To change the soft key column:
– Briefly press the "Menu change button"(1).
The grey bar jumps to the other soft key
column. The required soft keys are now
active and the functions assigned to them
can be switched on and off using the
corresponding soft key buttons (2).
NOTE
In order to shift between the individual menus
of the display operating unit, press the "Menu
change button" (1) for approx. 1 second.
NOTE
The functions of the two soft key columns
depend on the individual equipment of the
truck. Therefore, the soft keys on your display
operating unit may vary to those shown here.
Configuring Blue-Q efficiency mode
The following operating modes can be se-
lected to activate the Blue-Q efficiency mode:
STANDARD
• Blue-Q is turned off whenever the truck
is commissioned. The driver can use the
Blue-Q button to switch efficiency mode on
and off at any time while the truck is being
operated
FIXED
• Blue-Q is switched on permanently when-
ever the truck is commissioned and during
truck operation. The driver cannot turn effi-
ciency mode off
FIXED-FLEX
• Blue-Q is turned on whenever the truck
is commissioned. The driver can use the
Blue-Q button to switch efficiency mode on
and off at any time while the truck is being
operated
224 55048011501 EN - 12/2015