Still RX50-10, Original Instructions Manual

Page: 214 / 374

5
Operation
Operation of additional equipment
– Turn the key switch to position "I".
6311_003-030_V3
1
– Press button (1).
NOTE
Pressing the button again switches the work-
ing spotlights off again.
Switching the upper working spotlights
on/off automatically
– Turn the key switch to position "I".
– For information on switching on working
spotlights, see the "Switching lighting on
and off" chapter.
The lower working spotlights light up.
The upper working spotlights are switched on
automatically when the lift mast is lifted for a
period of at least two seconds.
NOTE
In these two seconds, a maximum of two lifts
can take place so that the working spotlights
do not switch on each time a precise adjust-
ment is made. If more lifts are carried out
during this time, the upper working spotlights
will remain switched off.
NOTE
The upper working spotlights are switched
off automatically when the truck is driven for
longer than one second and faster than 2.1
km/h.
Lift-height-controlled switching on/off of
the upper working spotlights
NOTE
This equipment is available only if a proximity
switch is fitted to the lift mast to record a
particular lift height of the fork carriage on
the lift mast.
– Turn the key switch to position "I".
– Switch on the working spotlights.
202 55048011501 EN - 12/2015