Safety tests
Carrying out regular safety inspec-
tions on the LPG system
Technical safety inspection of the LPG
system
The operating company must commission a
competent person to check the LPG system.
Observe the national regulations in the rele-
vant country! In Germany, check the system in
accordance with § 37 of the employers' liability
association regulations BGV D34 entitled "Ac-
cident prevention regulation for the use of
LPG".
NOTE
Please observe the definition of the following
responsible persons: "operating company"
and "competent person".
The LPG system must be checked:
●
Recurring in regular intervals, but at least
once per year
●
After repair work that may affect operational
safety
●
After changes that may affect operational
safety
●
After breaks in operation of more than one
year.
The following will be checked: proper condi-
tion, the possibility of leakages, function, in-
stallation and the functionality of the safety de-
vices.
The results from the inspection must be recor-
ded in an inspection document in accordance
with BGG 936 (observe the applicable national
regulations). The results must be retained until
the next inspection. The inspection documents
must be available for viewing by the authori-
ties at any time.
The type and scope of tests may differ accord-
ing to the country. Any differing legal provi-
sions in the respective country of operation
must be observed when using trucks with an
LPG system.
Safety
2
Safety tests
29
60048011601 EN - 08/2020
Summary of Contents for RCG15
