Still R70-40T Operating Instructions Manual Download

Page: 17 / 288

Foreword

Environmental considerations

Packaging

During delivery of the industrial truck, cer-

tain parts are packaged to provide protection

during transport. This packaging must be re-

moved completely prior to initial start-up.

ENVIRONMENT NOTE

The packaging material must be properly dis-

posed of after delivery of the industrial truck.

Disposal of units and batteries during

repair work

It may be necessary to replace units as part of

maintenance work. Replaced units must then

be disposed of.
Your vehicle is comprised of different materi-

als. Each of these materials must be
• disposed of,
• treated or
• recycled in accordance with regional and

national regulations.

NOTE

When disposing of batteries, please refer to

the battery manufacturer’s documentation.

ENVIRONMENT NOTE

We recommend working with a waste ma-

nagement company for disposal purposes.

171673 [EN]

Summary of Contents for R70-40T

































































































































































































































































































Search results

Summary of Contents for R70-40T

Reviews:

Related manuals for R70-40T

Brands by name

Popular brands

Still R70-40T, Operating Instructions Manual

Search results

Summary of Contents for R70-40T

Reviews:

Related manuals for R70-40T

Brands by name

Popular brands