Still OPX 20 Supplement To The Standard Operating Instructions Download Page 74

Page: 74 / 140

Lifting of persons with the forks (not

permitted)

DANGER

Risk of injury when lifting persons with the forks

–

Do not use the forks to lift people.

–

Never use the truck's remote control or side key-

pad to lift the operator or other persons with the

forks.

Observe the risk of accident due to

smoke in the event of fire or due to

view-obstructing vapours

DANGER

Risk of accident due to optical safety systems be-

ing rendered inactive by smoke in the event of fire

or due to view-obstructing vapours
The optical assistance systems (safety laser scan-

ner, movement tracking sensors, collision avoidance

camera) can be impaired by smoke in the event of

fire or by other view-obstructing vapours.

–

If there is smoke or other view-obstructing va-

pours in the area surrounding the truck, operate

the truck in

Manual

mode only.

Observe instructions regarding safe

storage of the remote control

DANGER

Risk of accident from unintentional actuation of the

remote control
When the truck is switched on, the remote control

must always be kept in a safe place to prevent unin-

tentional actuation. The remote control can be actu-

ated unintentionally, e.g. if it is carried in a trouser

pocket / jacket pocket, or if objects are placed on top

of the remote control.

–

While operating the truck, always keep the remote

control in the supplied holder.

Warning sign on the truck: Lifting of persons

with the forks is prohibited



Operating the iGo neo

Safety regulations in "Assistance" mode

50108046112 EN - 07/2020 (03)

Summary of Contents for OPX 20













































































































































Search results

Summary of Contents for OPX 20

Reviews:

Still OPX 20, Supplement To The Standard Operating Instructions, Page: 74 / 140

Search results

Summary of Contents for OPX 20

Reviews: