Still OPX 20, Supplement To The Standard Operating Instructions, Page: 70 / 140

Observe the risk of accident from cross-
ing the roadway immediately in front of
the truck
DANGER
Danger for people or objects that quickly cross the
roadway immediately in front of the truck.
The safety laser scanner detects obstacles in the
roadway in front of the truck. If a person or object
quickly crosses the detection area (1) immediately in
front of the truck, under certain circumstances the
immediate emergency stop may not prevent a colli-
sion.
–
Do not jump or step in the roadway if the truck is
almost at the same level.
–
Do not cross the roadway of the iGo neo with a
manually operated truck if the iGo neo is almost at
the same level. Note the fork length of the man-
ually operated truck.
–
The truck operating in
Assistance
mode al-
ways has priority. Observe lighting signals from
the iGo neo.
Ensure that particular care is taken
when there are bottlenecks in the aisle
WARNING
It is possible to set safety distances that are main-
tained between the truck and the rack contour or any
obstacles. A safety distance of less than 50 cm can
be set on the opposite side of the roadway to which
the truck is aligned, if the truck is being used in nar-
row aisles. See the chapter entitled "Required safety
distances in the aisle".
–
If there are bottlenecks on the roadway, especially
due to obstacles, these must be anticipated during
operation.
–
If the truck has to avoid obstacles, there must be
no persons in the passing area. If there are per-
sons in this area, switch
Assistance
mode to
PAUSED immediately using the iGo neo button on
the remote control or on the truck. If necessary,
push the emergency off switch on the truck.
–
–
Do not continue operation in
Assistance
mode
until all persons have left the passing area.
1
Risk of accident from crossing the roadway
immediately in front of the truck

Operating the iGo neo
4
Safety regulations in "Assistance" mode
62 50108046112 EN - 07/2020 (03)