Still OPX 20, Supplement To The Standard Operating Instructions, Page: 69 / 140

Observe the limitations of the foot pro-
tection sensors in the event of imper-
missible or poor application conditions
(OPX-L 20 S)
DANGER
Risk of feet being crushed in the event of impermis-
sible or poor application conditions
In the event of impermissible or poor application con-
ditions, the foot protection sensors may not reliably
detect objects in certain situations.
These situations include the following:
● Uneven ground (operator's foot is in a depression)
● The truck is raised on an object (e.g. piece of
wood)
● Heavily contaminated area of use
● Smoke, mist or other view-obstructing vapours
–
In the event of impermissible or poor application
conditions, only operate the truck in
Manual
mode.
–
Always keep feet away from the area under the
forks.
–
Observe the warning signs (1) on the truck.
–
Always wear suitable work safety shoes in the
correct size.
Averting the risk of collision using the
emergency off switches
CAUTION
Averting the risk of collision using the emergency off
switches
If there is a risk of collision with persons or objects,
push one of the emergency off switches on the truck.
The truck stops immediately.
Switch "Assistance" mode to PAUSED
before entering the truck
WARNING
When
Assistance
mode is switched on, the truck
may move unexpectedly when the operator enters
the truck. The operator may be injured as a result.
Before entering the truck, switch
Assistance
mode to PAUSED using the remote control.
45904391300
1
Warning sign: Risk of feet being crushed in
the vicinity of the pantograph lift

Operating the iGo neo
4
Safety regulations in "Assistance" mode
61 50108046112 EN - 07/2020 (03)