Still LTX 50 Original Instructions Manual Download Page 21

Page: 21 / 286

Environmental considerations

Disposal of components and

batteries

The truck is composed of different materials. If

components or batteries need to be replaced

and disposed of, they must be:

●

disposed of,

●

treated or

●

recycled in accordance with regional and

national regulations.

NOTE

The documentation provided by the battery

manufacturer must be observed when dispos-

ing of batteries.

ENVIRONMENT NOTE

We recommend working with a waste man-

agement company for disposal purposes.

Introduction

Environmental considerations

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands