Still LTX 50, Original Instructions Manual

Page: 16 / 286

Declaration that reflects the content of the declaration of con-
formity
Declaration
STILL GmbH
Berzeliusstraße 10
22113 Hamburg Germany
We declare that the specified machine conforms to the most recent valid version of the direc-
tives specified below:
Industrial truck type corresponding to these operating instructions
Model corresponding to these operating instructions
− "Machinery Directive 2006/42/EC"
1)
− "Supply of Machinery Safety Regulations 2008, 2008 No. 1597"
2)
Personnel authorised to compile the technical documents:
See declaration of conformity
STILL GmbH
1)
For the markets of the European Union, the EU candidate countries, the EFTA States and
Switzerland.
2)
For the United Kingdom market.
The declaration of conformity document is
supplied with the industrial truck. The declara-
tion shown explains the conformity with the
provisions of the EC Machinery Directive and
the Supply of Machinery Safety Regulation
2008, 2008 No. 1597.
An unauthorised structural change or addition
to the industrial truck can compromise safety,
thus invalidating the declaration of conformity.
The declaration of conformity must be careful-
ly stored and made available to the responsi-
ble authorities if necessary. It must also be
Introduction
1
Declaration that reflects the content of the declaration of conformity
6 45878043344 EN - 11/2021 - 12