Still LiftRunner B frames, Original Instructions Manual

Page: 56 / 108

5
Operation
Commissioning the B frames
CAUTION
Trolleys with heavy and tall loads may tip over when
cornering!
– Lash the load to the trolleys if necessary.
– Place the load on the trolleys in a way that
ensures that the centre of gravity as low as
possible.
– Apply the parking brake on the tow tractor.
NOTE
The maximum permissible load can be found
on the identification plate.
– Before loading, fully lower all frames.
– Push the trolley into the B frame from the
left-hand or right-hand side up to the stop.
The locking plates (1) must be fully raised
on both sides of the frame. The operator
must visually check that this is the case
immediately after the loading process.
Unloading the B frames
DANGER
Risk of crushing when unloading the trolleys!
– Never unload on chamfers or gradients.
– When unloading the trolleys, there must be
sufficient space to unload the trolleys safely
and to manoeuvre the trolleys safely.
– If a trolley is heavily loaded, the driver must be
prepared to exert a greater amount of force to
brake or steer the trolley.
– The foot pedal may be actuated only when the
frame is lowered.
50 50988046101 EN - 02/2017