Maintenance
6
Safety regulations for maintenance
Safety regulations for maintenance
General information
To prevent accidents during maintenance and
repair work, all necessary safety measures
must be taken, e.g.:
• Ensuring that unintentional movement of
the industrial truck is prevented.
• Ensuring that a raised lifting accessory
cannot be lowered when work is being
carried out beneath it.
Working on the electrical equipment
Work may only be performed on electrical
equipment in the industrial truck in a voltage-
free state. Function checks, inspections and
adjustments on energised parts may only be
performed by qualified persons, taking the
necessary precautions into account. Rings,
metal bracelets etc. must be removed before
working on electrical components.
To prevent damage to e-systems with elec-
tronic components, such as an electronic
lifting function, these components must be re-
moved from the industrial truck before starting
electric welding work.
Work on the electrical system is only permitted
with the approval of the authorised service
centre.
50988046052 EN - 10/2018
63
Summary of Contents for HPT 10 XE
