Still HPT 10 XE, Original Instructions Manual

Page: 29 / 100

Safety
3
Essentials for safe operation
Essentials for safe operation
Changes and retrofitting
NOTE
Changes and retrofitting are prohibited!
Warning regarding non-original parts
Original parts, attachments and accessories
are specially designed for this industrial truck.
We specifically draw your attention to the
fact that parts, attachments and accessories
supplied by other companies have not been
tested and approved by us.
CAUTION
Installation and/or use of such products may there-
fore have a negative impact on the design features
of the industrial truck and thus impair active and/or
passive safety.
We recommend that you obtain approval from the
manufacturer and, if necessary, from the relevant
regulatory authorities before installing such parts.
The manufacturer accepts no liability for any da-
mage caused by the use of non-original parts and
accessories without approval.
Damage, defects and misuse of
safety systems
The operator must report any damage or other
defects to the industrial truck immediately to
the supervisory personnel.
Industrial trucks that are not functional must
not be used until they have been properly
repaired.
Do not remove or disable safety systems.
Fixed set values may only be changed with the
approval of the manufacturer.
50988046052 EN - 10/2018 21