Still FXV 14, Original Instructions Manual, Page: 95 / 174

Transporting loads
Reading the capacity plate
CAUTION
Risk of loss of control
Before picking up a load, check that its weight does
not exceed the lifting capacity of the machine.
Refer to the nominal capacity specified on the truck's
capacity plate (1).
The values shown correspond to compact, standard
loads. They must not be exceeded. If they are excee-
ded, the stability of the truck and the resistance of
the mast and the chassis are no longer guaranteed.
The distance of the load centre of gravity from the
back of the fork and the lift height determine the
maximum load weight to be lifted. Check that the pal-
let is in good condition.
FXV 14 capacity
In pallet truck mode: 2000 kg
In pallet stacker mode: 1400 kg
FXV 16 capacity
In pallet truck mode: 2000 kg
In pallet stacker mode: 1600 kg
Reading the capacity plate
Example using an FXV 16 with initial lift, fit-
ted with a 4716 mm triplex mast:
●
1: Maximum lift height: 4802 mm
●
2: Maximum mast capacity: 820 kg with a
height of 4802 mm (centre of gravity: 400
mm)
●
3: Maximum mast capacity: 820 kg with a
height of 4802 mm (centre of gravity: 500
mm)
●
4: Maximum mast capacity: 820 kg with a
height of 4802 mm (centre of gravity
600 mm)
●
5: Lift height: 3000 mm
●
6: Mast capacity: 1600 kg with a height of
3000 mm (centre of gravity: 400 mm)
●
7: Mast capacity: 1600 kg with a height of
3000 mm (centre of gravity: 500 mm)
●
8: Mast capacity: 1600 kg with a height of
3000 mm (centre of gravity: 600 mm)


Use
4
Transporting loads
85 11748011651 EN - 02/2021 - 06