Still FXH 20N, Original Instructions Manual

Page: 52 / 130

Driver's compartment settings
Adjusting the seat
The seat is equipped with an operator pres-
ence detector.
The operator must adjust his weight by incre-
ments of 10 kg to trigger this detection.
Proceed as follows:
–
Sit on the seat
–
Turn the adjustment wheel (1) until the de-
sired weight is reached
–
Put the truck into service
The seat's operator presence detector cannot
be activated if the weight setting is too high or
too low.
This operation also enables you to adjust the
hardness of the seat.
Adjusting the floor
The floor is fitted with a pressure-based height
adjustment system.
To adjust the floor height, proceed as follows:
–
Sit on the seat.
–
Press the floor unlocking button (2) and
hold it down for the duration of the opera-
tion.
–
Exert pressure on the floor (3) by pushing it
with your legs to obtain a good driving posi-
tion.
–
Release the button.
NOTE
Adjusting the floor is not possible when the
truck is in cold store. The cylinder for adjust-
ment does not work at low temperatures.


Use
4
Driver's compartment settings
42 11548011651 EN - 02/2021 - 09