Still FXH 20, Original Instructions Manual

Page: 50 / 140

4
Use
Using the display-operating unit
Using the display-operating unit
Selection buttons
The operator selects the menus using the four
selection buttons:
• The Blue Q button (1) to select Blue Q
mode, hare mode or tortoise mode
• The left arrow button (2) to scroll left through
the drop-down menu
• The right arrow button (3) to scroll right
through the drop-down menu
• The confirm button (4) to confirm the
highlighted choice on the screen
Display of the drive wheel position
The forklift operator can find out the position of
the drive wheel by referring to the display.
Proceed as follows:
– Press the left arrow or right arrow button to
scroll through the menu.
– Select the Wheel menu (2).
– Press the confirm button (1).
The position of the drive wheel is then shown
on the display (3).
42 11548011751 EN - 10/2018