Still FXH 20, Original Instructions Manual

Page: 48 / 140

4
Use
Driver's compartment settings
Driver's compartment settings
Adjusting the seat
The driver's seat has several settings, allowing
you to adjust the driving position to suit you:
• The lever (1) allows you to adjust the tilt of
the backrest
• The lever (2) allows you to adjust the
horizontal position
• The adjustment wheel (3) allows you to
adjust the weight of the operator for the
operator presence detector
To adjust the seat, proceed as follows:
– Sit on the seat.
Adjusting the backrest:
– Pull the adjustment lever (1) to tilt the
backrest
Adjusting the depth:
– Pull the adjustment lever (2) to move the
seat forwards or backwards
Weight setting:
The seat is equipped with an operator pres-
ence detector:
The operator must adjust his weight by
increments of 10 kg to trigger this detection.
– Turn the adjustment wheel (3) until the
desired weight is reached
NOTE
The seat's operator presence detector cannot
be activated if the weight setting is too high or
too low.
This operation also enables you to adjust the
hardness of the seat.
– Put the truck into service.
40 11548011751 EN - 10/2018