Still FXD 20 N, Original Instructions Manual

Page: 42 / 142

4
Use
List of checks prior to start-up
List of checks prior to start-up
WARNING
Damage or other defects on the forklift truck or
attachments (special equipment) can result in
accidents.
If damage or other faults are noticed on the truck
or attachments (special equipment) during the
following inspections, do not use the truck until
it has been properly repaired. Do not remove or
disable the safety systems and switches. Do not
change the pre-set values.
WARNING
Risk of falling!
When working on high-level parts of the truck, do
not use truck components for access or to stand on.
– Use suitable access equipment.
Before start-up, ensure that the truck operates
correctly.
To do this, perform the following checks:
– Fork arms or other load-carrying equipment
should not show any signs of noticeable
damage (for example: bending, cracks,
significant wear).
– Check that there are no signs of leaking
consumables under the truck.
– Do not restrict the field of vision. Ensure the
visible area specified by the manufacturer
is observed.
– Attachment parts (special equipment) must
be properly secured and function according
to their operating instructions.
– Damaged or missing stickers must be
replaced in compliance with the marking
position table.
– The guard grille must be intact and securely
mounted.
– The roller guide rails must be coated in a
visible layer of grease.
– The wheels must show no signs of defects
or heavy wear. They must be mounted
correctly.
– Check that there are no foreign objects that
could hinder the operation of the wheels
and rollers.
– The warning devices (horn etc.) must work.
– The battery cover must be closed.
– Check that the covers are correctly posi-
tioned.
– The chains must be in perfect condition and
must be evenly and correctly tensioned.
– The operator must be qualified to drive the
truck. The operator must be able to reach
the controls and operate them (especially
the anti-crush device). Do not obstruct
access to the controls.
Please inform your supervisor if you notice
any defects.
32 11648011651 EN - 09/2019