Still FXD 20 N, Original Instructions Manual

Page: 108 / 142

5
Maintenance
General maintenance information
General maintenance information
General
The following instructions contain all the
information required for maintenance of your
truck. Carry out the various maintenance work
in compliance with the maintenance plan.
This will ensure that your truck is reliable and
in good working order and that the warranty
remains valid.
Maintenance plan
One of the display functions indicates the
truck's hours of use. Refer to it and consult the
truck's maintenance plan.
The maintenance plan is followed by advice to
facilitate work.
Maintenance intervals must be reduced if the
truck is used under harsh conditions (extreme
heat or cold, large quantities of dust).
Grade and quantity of lubricants and
other consumables
Only lubricants and other consumables
specified in these operating instructions are
authorised for use in maintenance work.
Lubricants and other consumables required
for truck maintenance are listed in the mainte-
nance specifications table.
Never mix different grades of grease or oil. If
it is absolutely necessary to change brands,
make sure to flush thoroughly beforehand.
Before changing any filters or working on
the hydraulic system, thoroughly clean the
surface and the areas around the part.
All containers used to pour oil must be clean.
98 11648011651 EN - 09/2019