Still FM-X, Original Instructions Manual

Page: 128 / 292

5
Operation
Lifting
– Remove the securing bolt from the fork
extension (1).
– Push the fork extension onto the fork arms
until it is flush with the fork back.
– Insert the securing bolts located behind the
fork back fully into the fork extension.
– Insert the linch pin into the securing bolt and
secure.
Removal
– Remove the linch pin (3) from the securing
bolt (2).
– Remove the securing bolt from the fork
extension (1).
– Pull the fork extension from the fork arms.
– Insert the securing bolt fully into the fork
extension.
– Insert the linch pin into the securing bolt and
secure.
Working platforms
The use of working platforms in conjunction
with industrial trucks is regulated by national
law.
This legislation should be observed. The use
of working platforms is only permitted by virtue
of the legislation in the country of use. Before
using working platforms, consult your national
regulatory authorities.
WARNING
No one should ever stand on the forks to be raised
or transported!
118 50988078001 [EN]