Still FM-X EW Series Original Instructions Manual Download Page 92

Page: 92 / 360

Operation

Testing and activities before daily use

Moving the driver's seat

– Lift the lever (1) and hold.
– Push the driver's seat into the desired

position.

– Release the lever.
– Ensure that the driver's seat is securely

engaged.

Adjusting the seat backrest

Do not put pressure on the seat backrest while

disengaging it.
– Lift the lever (2) and hold.
– Push the seat backrest into the desired

position.

– Release the lever.
– Ensure that the seat backrest is securely

engaged.

NOTE

The backwards tilt angle of the seat backrest

can be restricted by the structural condition of

the truck.

50988078001 EN - 10/2018

Summary of Contents for FM-X EW Series









































































































































































































































































































































































Search results

Summary of Contents for FM-X EW Series

Reviews:

Still FM-X EW Series, Original Instructions Manual, Page: 92 / 360

Search results

Summary of Contents for FM-X EW Series

Reviews: