Still FM-X EW Series Original Instructions Manual Download Page 82

Page: 82 / 360

Overviews

Operating devices and display elements

Service LED (red)

Temperature LED (yellow/red)

Charge state LEDs (red/green)

Lithium-ion battery display

The lithium-ion battery has its own display.

The display shows information about the

error status (1), the temperature (2) and the

charging status (3) of the lithium-ion battery.
– See the "Display" chapter in the operating

instructions provided by the battery manu-

facturer, "BMZ".

Operating devices for hydraulic and

traction functions

Different versions of the operating devices are

available for operating the truck's hydraulic

and traction functions. The truck can be

equipped with the following operating devices:
• Joystick 4Plus
• Fingertip

50988078001 EN - 10/2018

Summary of Contents for FM-X EW Series









































































































































































































































































































































































Search results

Summary of Contents for FM-X EW Series

Reviews:

Still FM-X EW Series, Original Instructions Manual, Page: 82 / 360

Search results

Summary of Contents for FM-X EW Series

Reviews: