Still FM-X EW Series, Original Instructions Manual, Page: 45 / 360

Safety
2
Basic principles for safe operation
Damage, defects and misuse of
safety systems
Damage or other defects on the truck or
attachment must be reported to the supervisor
or responsible fleet manager immediately so
that they can have the defect rectified.
Trucks and attachments that are not functional
or safe to drive may not be used until they have
been properly repaired.
Do not remove or deactivate safety systems
and switches.
Fixed set values may only be changed with the
approval of the manufacturer.
Work on the electrical system (e.g. connecting
a radio, additional headlights etc.) is only
permitted with the manufacturer's written
approval. All electrical system interventions
must be documented.
Even if they are removable, roof panels may
not be removed, as they are designed to
protect against small falling objects.
Wheels and tyres
DANGER
Risk to stability!
Failure to observe the following information and
instructions can lead to a loss of stability. The truck
may tip over — risk of accident!
The following factors can lead to a loss of
stability and are therefore prohibited:
• Wheels not approved by the manufacturer
• Excessive wear to the tyres
• Tyres of inferior quality
• Changes to the wheel rims
• Combination of wheels from different
manufacturers
The following rules must be observed to
ensure stability:
• Only use wheels with equal and permitted
levels of wear to the tyres.
• Only use tyres of the original tyre type.
50988078001 EN - 10/2018 33