Still FM-X EW Series, Original Instructions Manual

Page: 316 / 360

5
Maintenance
Maintaining operational readiness
1
1
2
Replacing the heating system filter
for the cab (variant)
The heating system filter is located in the door
panelling beneath the window.
– Unscrew the screws (1) and remove the
cover on the heating system.
– Completely remove the filter mat (2) from
the filter housing.
– Check the filter mat for contamination and
beat out.
NOTE
Replace the filter mat when it is clearly grey,
but at least every two months.
– Remove any dirt that has collected in the
filter housing and recirculated-air inlet.
– Re-insert the filter mat into the filter housing.
– Make sure that the filter mat sits correctly
and accurately in the filter housing.
– Fit the heating system cover and secure
using the screws.
304 50988078001 EN - 10/2018