Still FM-X EW Series, Original Instructions Manual

Page: 310 / 360

5
Maintenance
General maintenance information
At operating hours
500 1000 1500 2000 2500
Carried out
3000 3500 4000 4500


Lubricating
Lubricate using approved lubricants in accordance with the lubrication plan
Lubricate the fork tilter/sideshift
In addition, lubricate the lubricating nipple for the door hinges and the door closing
mechanism every six weeks
Ordering spare parts and wearing
parts
Spare parts are provided by our spare parts
service department. The information required
for ordering parts can be found in the spare
parts list.
Only use spare parts as per the manufac-
turer's instructions. The use of unapproved
spare parts can result in an increased risk of
accidents due to insufficient quality or incor-
rect assignment. Anyone using unapproved
spare parts shall assume unlimited liability in
the event of damage or harm.
Quality and quantity of the required
operating materials
Only the operating materials specified in the
maintenance data table may be used.
– The required consumables and lubricants
can be found in the maintenance data table.
Oil and grease types of a different quality
must not be mixed. This negatively affects
the lubricity. If a change between different
manufacturers cannot be avoided, drain the
old oil thoroughly.
Before carrying out lubricating work, filter
changes or any work on the hydraulic system,
carefully clean the area around the part
involved.
298 50988078001 EN - 10/2018