Still FM-X EW Series Original Instructions Manual Download Page 31

Page: 31 / 360

Foreword

Environmental considerations

Packaging

During delivery of the truck, certain parts

are packaged to provide protection during

transport. This packaging must be removed

completely prior to initial start-up.

ENVIRONMENT NOTE

The packaging material must be disposed of

properly after delivery of the truck.

Disposal of components and

batteries

The truck is composed of different materials. If

components or batteries need to be replaced

and disposed of, they must be:
• disposed of,
• treated or
• recycled in accordance with regional and

national regulations.

NOTE

The documentation provided by the battery

manufacturer must be observed when dispo-

sing of batteries.

ENVIRONMENT NOTE

We recommend working with a waste mana-

gement company for disposal purposes.

50988078001 EN - 10/2018

Summary of Contents for FM-X EW Series









































































































































































































































































































































































Search results

Summary of Contents for FM-X EW Series

Reviews:

Still FM-X EW Series, Original Instructions Manual, Page: 31 / 360

Search results

Summary of Contents for FM-X EW Series

Reviews: