Still FM-X EW Series, Original Instructions Manual

Page: 305 / 360

Maintenance
5
General maintenance information
Maintenance - 1000 hours/year
At operating hours
1000 2000 4000 5000 7000
Carried out
8000 10000 11000 13000 14000


Chassis, bodywork and fittings
Examine the chassis, covers, support elements and mast mounting for cracks or
damage (visual inspection)
Check the overhead guard/cab and panes of glass for damage; check the visibility
through the glass
Check the controls, switches and joints for damage, and apply grease and oil
Check the driver's seat, seat adjustment and protective covers for correct function
and for damage
Check the driver restraint system (option) for correct function and for damage, and
clean
Check the battery tray, lock and sensor for correct function and for damage
Check the reach carriage guides, rollers and stops, and adjust if necessary
Check the reach travel measuring system and limit stops
Check the drive and brake actuations (single and dual pedal) for correct function and
for damage Clean dust and dirt from the mechanisms
Visually inspect the driver's compartment mounting on the battery side (for trucks
built up to and including 05/2015; Service Information 512015009).
Load wheels
Check the wheels for damage, wear and ease of movement
Check the wheel mountings for operating noise and play
Tighten the wheel screws using a torque wrench (tightening torque: 195 Nm)
Adjust the side chassis supports
Drive wheel
Check the drive wheel and tyres for damage and wear
If necessary, replace the drive wheel
Check the wheel screws and tightening torques
Gearbox
Perform a visual inspection for leak tightness, secure attachment and external da-
mage. Check for operating noise.
Check the gearbox oil level
Traction motor, steering motor, pump motor
Visual inspection for mounting and external damage. Check for operating noise.
Clean the external fans. Functional test
50988078001 EN - 10/2018 293