Still FM-X EW Series, Original Instructions Manual, Page: 284 / 360

4
Operation
Transporting the truck
1
Lashing trucks with a cab
CAUTION
Abrasive lashing ropes may damage the surface of
the truck.
– Position slip-resistant pads underneath the
lashing ropes (e.g. rubber mats or foam).
DANGER
If the lashing ropes slip, the load can move!
The truck must be lashed securely so that it cannot
move during transportation.
– Make sure that the lashing straps are tightened
securely and that the pads cannot slip off.
– Park the truck securely (refer to the chapter
entitled "Parking the truck securely").
– Position slip-resistant pads underneath the
lifting points (1) (e.g. rubber mats or foam).
– Attach the lashing ropes in accordance with
the illustration. Securely lash the truck.
Crane loading (standard truck with
overhead guard)
Crane loading is only intended for transporting
the complete truck for its initial commission-
ing. For application conditions that require
frequent loading or that are not presented
here, please contact the manufacturer with
regard to particular variants.
Trucks may only be laden by persons with suf-
ficient experience with the suitable harnesses
and hoists.
272 50988078001 EN - 10/2018