Still FM-X EW Series, Original Instructions Manual, Page: 280 / 360

4
Operation
Cleaning the truck
6210_810-004
Cleaning load chains
WARNING
Risk of accident!
Load chains are safety elements.
The use of cold cleaning solvents, chemical clea-
ners or fluids that are corrosive or contain acid or
chlorine can damage the chains; use of these items
is forbidden!
– Observe the manufacturer's guidelines for
working with cleaning materials
– Place a collection vessel under the lift mast
– Clean using paraffin derivatives, such as
benzine
– When using a steam jet, do not use addi-
tional cleaning agents.
– Remove any water in the chain links using
compressed air immediately after cleaning.
Move the chain several times during this
procedure.
– Immediately after drying the chain, spray it
with chain spray. Move the chain several
times during this procedure.
For chain spray specifications, refer to the
chapter entitled "Maintenance data table".
ENVIRONMENT NOTE
Dispose of any fluid that has been spilled
or collected in the collection vessel in an
environmentally friendly manner. Follow the
statutory regulations.
Cleaning panes of glass and mirrors
Any panes of glass and mirrors, e.g. in the cab
(variant), must always be kept clean and free
of ice. This is the only means of guaranteeing
good visibility.
CAUTION
Do not damage the rear window heating (inside).
– Take great care when cleaning the rear window
(1) and do not use any objects with sharp edges.
– Clean the panes of glass and mirrors.
268 50988078001 EN - 10/2018