Still FM-X EW Series, Original Instructions Manual, Page: 255 / 360

Operation
4
Replacing and transporting the battery
was supplied with a dry pre-charged battery
(only lead-acid batteries). In this situation,
note the information and guidelines from the
battery manufacturer.
If the battery was procured separately to the
truck, the following must be checked by the
authorised service centre:
• Nominal voltage
• Required minimum weight
• Fitted battery male connector
• Characteristic curve for battery discharge
(lead acid batteries)
• Battery approved for this truck by STILL
Alternating between a lead-acid
battery and a lithium-ion battery
Before changing from a lead-acid battery to
a lithium-ion battery, the authorised service
centre must perform a one-off conversion on
the truck.
NOTE
The only intended use of a lead-acid battery
in a truck with a lithium-ion battery is in the
event of an emergency; for example, if the
lithium-ion battery is faulty.
Trucks with lithium-ion-battery ex works
Battery tray Truck operation ex works
After the conversion
323 Lithium-ion
Lithium-ion/lead-acid
324 Lithium-ion Lithium-ion/lead-acid
325 Lithium-ion
Lithium-ion (*) / lead-acid (*)
326
- -
(*) Also requires a change of battery tray
Trucks with lead-acid battery ex works
Battery tray Truck operation ex works
After the conversion
323 Lead-acid Lithium-ion/lead-acid
324 Lead-acid Lithium-ion/lead-acid
325 Lead-acid
Lithium-ion (*) / lead-acid (*)
50988078001 EN - 10/2018 243